Bright IdeasKNX control
KNX LED controllers and drivers
KNX controllers for LED strips and 24 V drivers with a built-in KNX interface.
4 × 5 APer controller
64Scenes
0,1 %Minimum dimming
4 × 5 APer controller
64Scenes
0,1 %Minimum dimming
Features
- 4-channel controllers for single colour and RGBW strips, DIN rail or flat housing.
- Direct connection to the KNX bus, with physical and group addresses.
- Switching, relative and absolute dimming, preset values and up to 64 scenes.
- Bus recovery and status and error reports.
- 100 and 200 W 24 V drivers with KNX interface, active PFC and dimming down to 0.1 %.
- Commissioning and project design with ETS.
Where it is used
HotelsOfficesHomes
Controllers
| Code | Input | Output | Power | Features |
|---|---|---|---|---|
| SR-KNX9501FA | 12–36 V DC | 4 × 5 A | 240–720 W | DIN rail, single colour |
| SR-KNX9511FA | 12–36 V DC | 4 × 5 A | 240–720 W | DIN rail, RGBW |
| SR-KNX9502FA | 12–36 V DC | 4 × 5 A | 240–720 W | Flat housing, single colour |
| SR-KNX9512A | 12–36 V DC | 4 × 5 A | 240–720 W | Flat housing, RGBW |
Constant voltage drivers
| Code | Input | Output voltage | Current | Channels | Power | PF | Efficiency |
|---|---|---|---|---|---|---|---|
| SRP-KNX9512-24-100CVF | 100–240 V AC | 24 V | 4.1 A per channel, 4.1 A total | 4 | 100 W | >0.9 | 90 % |
| SRPC-KNX9512-24-200CVF | 100–277 V AC | 24 V | max. 4.1 A per channel, 8.4 A total | 4 | 200 W | >0.98 | 93 % |
Data
- Brand
- Sunricher
- Protocol
- KNX (EN 50090 and EN 13321-1)
- Commissioning
- ETS
Bright Ideas technical data.
